MR25
Compact and effective! The MR25 connects to a standard ¾ inch garden hose to operate, with flows ranging from 3 to 10 gallons per minute. The sheer ease of setup and operation makes the MR25 very popular with homeowners for watering large lawns and gardens. Horse owners with small arenas and dressage rings rave about this model’s ability to control dust and provide safe, uniform footing.
MR32
The MR32 combines heavy duty construction with the simple, yet maneuverable two wheel design of the MR25. A 240 feet hose length allows irrigated areas up to 300 feet long and 120 feet wide for sports fields, horse arenas, hobby farms, or any area up to 4 acres. The MR32 is also available with a hitch kit making it compatible for towing with an ATV or small garden tractor!
MR32 Ultra Drive
The MR32 Ultra Drive utilizes dry cell battery technology that powers a small 12-volt motor to retract the hose. Simply charge the battery, move the unit to any operating location and begin watering for up to eight hours of continuous operation. This system does not require any water flow or pressure to retract the hose, meaning any water source from 3 to 30 gallons per minute is adequate. Low pressure is not a problem with the Ultra Drive!
MR43
The MR43 is the ideal machine for achieving single pass coverage on football fields, large riding arenas, and more. With flow ranges from 15 to 50 gallons per minute and a 393 feet hose length, the MR43 can effectively water up to 1.5 acres in a single pull! The ability to add the reliable Honda boost pump kit, can greatly enhance performance in low-pressure situations.
MR58
The MR58 carries 460 feet of tube length, and is a good fit for many applications. With flows up to 100 gallons per minute, the MR 58 is capable of watering up to 2 acres in a single pass! This model is widely used for larger sports fields, hobby farms, parks, polo fields, and more. A powerful 9 HP booster kit may be added for attaining maximum coverage.
MR63
The MR63 is capable of delivering the largest volumes in Micro Rain line! This model boasts a large diameter 2.1 inch hose that is 328 feet in length. If large amounts of water are available for use, the MR63 can utilize up to 140 gallons per minute for the serious irrigator. Uses for the MR63 include football fields with both natural and artificial surfaces where large amounts of water need to be applied in a short amount of time. Vegetable farms, sod farms, and equestrian facilities with large arenas also benefit from the MR63’s ability to irrigate over 200 feet widths and up to 450 feet in length.
MR58RL
The MR58RL is equipped with all of the great features of the Micro Rain line, and also includes a rotating base and heavy galvanized frame and chassis. The rotating base allows the user to position the machine in the center of the area to be irrigated, rotate the reel 90 degrees and make an initial pull with a 660 feet hose in one direction and upon completion, rotate the reel 180 degrees and make another pull in the opposite direction for a total of up to 1320 feet total length in a single setting! This model is now the largest in the Micro Rain line capable of effectively irrigating up to 25 acres in a wide variety of settings.
NOTICE: These specifications are for a guide only and are based on theoretical calculations and performance tests. This is to be used as a guide only, as performance may vary under field conditions or when machine speed control adjusted. The combination of gallons per minute, pressure, and atmospheric conditions such as wind speed will determine your performance characteristics. Shortening tube length can also increase the performance of your Micro Rain.
Micro Rain performance can be greatly enhanced by adding booster pumps to increase pressure. Visit our pump section for more information.
About Us
Since our inception, The Basics has been a service oriented dealer of unique irrigation and recreational products. Our goal is to offer customers the most dependable, convenient products while providing unparalleled customer service.
To further our goal, Micro Rain has developed a turbine-driven traveling sprinkler that operates using almost any water source. The engineering and design of the Micro Rain sprinkler has proven to be simple, reliable, and cost effective for our customers. The Micro Rain line features a broad range of sizes to accommodate a variety of settings for portable irrigation.
Micro Rain systems are created with components from expert manufacturers throughout the world. The systems are assembled with precision, water-tested and packaged for shipping at the facility in Yukon, OK. They have a large inventory to ensure product and parts availability at all times and our central location in Southern Idaho allows us to provide timely and affordable delivery when orders are placed.
Please contact The Basics when considering the purchase of a traveling irrigation system. Our friendly, trained staff is waiting to provide you with information to help you select a Micro Rain system to match your watering needs!
Getting Back
To
"The Basics"
Water-Land
Contact:
Del
for Features, Delivery and Pricing
The Basics Water & Land Service LLC PHONE: 1-208-934-8007 FAX: 1-208-934-4411
317 Orchard Drive
Gooding, Idaho 83330